With a surface contaminant removal greater than conventional manual guns, the ENVIROBOT®️ M4000 improves coating adhesion and extends coating life, increasing in-water efficiency. It uses only ultra high-pressure water without any additives and collects 100% of all waste produced during the operation.
The ENVIROBOT®️ comes with a fully equipped container with all components controlling the robot on the steel surface and vacuums the paint and water after removing the coating. The wastewater with paint residue and all particulates are sent to the holding tank.
Reduces Man Power
Safe,Reliable and Efficient
Complete Effluent Containment
Low Operating Costs
Offshore and Pier Operations
With the exclusive use of the ENVIROBOT®️ technology, Chariot Robotics offers its customers a nonexistent service. The complete collection of all waste produced allows offshore or pier operations with maximum safety.
Due to its advanced technology, ENVIROBOT® M4000 can perfectly perform all waterjetting standards. With a speed that can reach 140m²/ hour, the ENVIROBOT® is the best solution on the market.
WJ1UP TO 35M²/HOUR
The surface willl be free of all previously existing visible rust, coatings, mill scale, and foreign matter and have a matte metal finish.
WJ2UP TO 70M²HOUR
The surface will be cleaned to a matte finish with at least 95% of the surface area free of all previously existing visible residues.
WJ3UP TO 105M²/HOUR
The surface will be cleaned to a matte finish with at least two-thirds of the surface area free of all previously existing visible residues.
ULTRASWEEPUP TO 140M®/HOUR
The surface will have all loose rust. loose mill scale and loose coating uniformly removed.
Technical Specification
DIMENSIONS: 182 x 70 x 56 cm (72x27x22 in) CUTTING WIDTH: 38 cm (15 '') WEIGHT: 222 kg (490 lb) SPEED: 0 to 30 cm (0 to 12 in) p/sec MAX PRESSURE: 2 800 BAR (40 000 PSI)